Model H KATANA喷头，Sever软件读取不到喷头序列号，温度，电压

问题描述：

Sever 软件读取不到喷头参数

Sever software can't read head data

问题分析：

Problem Analysis

主要原因是设备硬件版本比较老，需要升级软件

The main reason is that the device hardware version is old and needs to be upgraded.

问题解决：

Problem Solving

附件1是升级程序，附件2是升级软件

Attachment 1 is the upgrade program, and Attachment 2 is the upgrade software.

打开升级软件，input 升级程序，出现以下界面

Open the upgrade software, enter the upgrade program, and the following interface will appear

model H 一共四块头板，然后一块块点击 upgrade 完成升级即可。

Model H has four head panels in total. Just click upgrade on each panel to complete the upgrade.

• Related Articles

• Model 收放卷问题自查表，森扬系统

  Model 收放卷问题自查地址，见附件

• Troubleshooting of abnormal manual paper feeding speed--Model XP

  When the manual paper feeding speed on the touch screen is abnormal 1. First, check whether the radius of the winding is consistent with the manually measured value (1) Manually measure the actual winding radius (excluding the inflatable rod), method ...

• Model XP 触摸屏报104 小车阻力过大错误

  原因：主板给出的小车移动信号与磁栅反馈的位置信息有出入。 解决思路：检查驱动器报错，磁栅转接板上的接线端子接触是否良好，磁栅转接板及小车电源是否异常，拖链内磁栅信号线，磁栅条本身是否受损，导轨阻力是否过大。

• model X plus 新装机开机报112 错误

  处理办法：1.用金属螺丝刀去保湿盘升降传感器感应一下，让机器先开机；2.导入正确的配置文件；3.检查传感器类型 4.主板的配置文件导出更换主板后导入

• Model S 打印过程中触摸屏报小车转动比过大故障

  原因是喷头小车有一边的防撞传感器异常导致，更换传感器就恢复正常